Installation Notes
The cleats should be installed properly to secure the cables.
It is not necessary for every cleat to be attached onto the tray.
Every cleat should be restrained to keep cables bundling.
The bend radius should be 8 to 12 times of the cable diameter.
The cleats should always be installed at the beginning, the middle, the end of the bend part.
The distance between the cleats on the bend should be no more than 0.3M from center to center.
Construction Data of the Cable Cleats
Cleat Material
Frame
Closure Hardware
Integral Pad
Tools Required
Mounting Bolt
Performance on the Cable Cleats
Resistance to Electromechanical Force
Lateral Load Test
Axial Load Test
Operating Temperature Range
Resistance to Impact
Needle Flame Test
Resistant to UV light Test